Professional Jewellery Making Supplies: How a Jeweller Chooses Stringing Material for a Commission

How a jeweller chooses silk, High Performance cord or wire for a commission: bead hardness, weight, hole size, wear and documentation.

9 Nov 20266 min

Choosing professional jewelry making supplies for a commission starts with the brief, which arrives with a bead selection, a budget, and a client who wants the piece to last. The stringing material is the part nobody sees and everybody depends on. This guide sets out the order in which a working jeweller decides between 100% Natural Silk, High Performance cord, and Jewelry Wire, and how to record the decision so the piece can be serviced years later.

The brief decides the material, in this order

Five questions settle almost every commission, and the order matters because each one narrows the next. First, how hard are the beads, and what will their drill holes do to a cord? Second, how heavy is the finished piece? Third, what is the hole diameter, measured properly? Fourth, how will the piece be worn? Fifth, does the client want knots between beads or a continuous strand? Only after those answers do you pick a product. Choosing the material first and forcing the beads to suit it is how commissions come back for repair.

Bead hardness first: what the drill hole will do to a cord

Hardness is the first filter because it decides how fast a hole edge works on a cord. Rock crystal and amethyst are quartz, which rate 7 on the Mohs scale, and the edge of a drilled quartz bead is hard and abrasive. Soft stones, pearls, and glass are gentler on the cord and suit the traditional approach.

Pearls and soft stones suit GRIFFIN 100% Natural Silk, the traditional stringing material for classic pearl necklaces since 1866, and pearl necklaces knotted with silk lie well on the body. For hard gemstones, heavy beads, metal beads, and beads with small or difficult drill holes, GRIFFIN High Performance is the specified choice: its high-tech fibres are 15 times stronger than steel, and necklaces or bracelets using hard gemstones require it. GRIFFIN's gemstone guide gives starting sizes: rock crystal No. 0 to 2, amethyst No. 2 to 4, tiger's eye and onyx No. 4 to 8, and hematite, lapis, and pyrite No. 6 to 10.

Weight second: drape against load

Weight is where the same bead size gives different results in different stones. Quartz has a specific gravity of about 2.65, while hematite is about 5.3 and pyrite about 5.0, so a strand of hematite beads weighs roughly double the same strand in rock crystal. A standard-length necklace of 10 mm lapis can pass 60 grams.

A heavy strand loads the cord at every knot and at the clasp, and the load acts for as long as the piece is worn. High Performance does not stretch, so a heavy necklace or choker does not elongate over time. For lighter pieces, silk gives the soft drape that clients expect from a pearl or soft-stone strand. If the strand is heavy and the client wants it to hang like a fabric, that is a signal to read the wire section below.

Hole diameter third, and measuring it properly

A cord must pass through the hole, and a knotted cord must also be thick enough that its knot sits against the bead and does not vanish into it. These two needs pull in opposite directions, and the hole diameter settles them.

Measure the hole with a fine graded needle or a bead gauge, and do it on several beads from the strand, not on the first. Holes in natural stones vary. Then match the cord: 0.15 to 0.30 mm for very small holes, 0.35 to 0.50 mm for small pearls and glass, 0.65 to 0.75 mm for mid-sized beads, 0.80 to 0.90 mm for large and heavy beads, and 0.98 to 1.05 mm for the largest holes. GRIFFIN silk runs from No. 0 (about 0.30 mm) to No. 16 (about 1.05 mm), and High Performance from No. 0 to No. 10 (0.30 to 0.90 mm).

If a hole sits between two sizes, take the smaller cord only when it passes through with some resistance and not by force. Remember that a needle-and-cord pass doubles the thickness at the bead. Always test the cord through the specific bead hole before starting.

SituationStarting point
Pearls and soft stones, knotted100% Natural Silk, size matched to the hole
Hard gemstones, heavy or metal beads, small holesHigh Performance, white, No. 0 to 10
Heavy strand with large holes, soft drape, no knotsJewelry Wire, 19 or 49 strands

Wear pattern: daily piece, occasional piece, heirloom

A daily bracelet meets doors, desks, and washing hands. An occasional necklace spends most of its life in a box. An heirloom may be restrung every few decades by a different jeweller. The wear pattern changes how much margin you build in: choose the larger of two workable sizes for a daily piece, plan for restringing in an heirloom, and keep the occasional piece away from tension while it is stored. Tell the client plainly which category their piece falls into, because it shapes their care.

Ask the client three plain questions at the first meeting: how often will the piece be worn, will it be worn against skin or over clothing, and who will look after it? The answers cost nothing and often change the specification. A necklace worn against the skin every day collects moisture and oils, while one worn over a jacket seldom does. Write the answers on the record card before you buy a single bead.

Knotted or continuous, and what the client is really asking for

When a client says "just string them," they usually mean one of two things. Some want the classic look of a knotted strand, with each bead separated and the string protected. Others want a continuous strand that moves freely and costs less labour. The difference changes the material and the price.

Knotting between beads keeps hard-edged beads from touching, limits loss if a strand ever breaks, and suits silk and High Performance, both of which are Triple Twisted, do not fray, and come with an integrated needle. A continuous strand suits wire. Ask the question early, and quote the knotted version honestly, since knotting takes time.

When wire is the answer instead of cord

Choose wire when a piece needs drape with weight and no knots. GRIFFIN Jewelry Wire is stainless steel wire under a transparent nylon coating, described as real steel cable in miniature, with no corkscrew effect and no internal tension. It stays flexible, so it drapes around the neck, and it can be knotted when a design calls for it. Unlike a conventional tigertail, which can hold a kink once bent, it is built from twisted strands, 19 or 49 of them.

The 19-strand version comes clear, silver plated, and 24K gold plated, in diameters from about 0.25 to 0.60 mm, with 7-micron plating on the plated versions. The 49-strand version is clear only. Finish wire with sterling silver crimp beads or crimp tubes, and record the crimp size with the wire diameter.

Documenting the choice so the piece can be serviced later

Keep a record card for every commission: the cord or wire, its size and colour, the knot spacing, the number of beads, the clasp, and the finishing method. Add the hole measurements and the reason for the material choice. A jeweller restringing the piece in twenty years can then reproduce it, and you can answer a client's question in a minute. Photograph the finished strand before it leaves the bench.

Give the client a short copy of the card with the invoice. It tells them what the piece is made of, how it was strung, and what to ask for when it needs restringing, which turns a one-off sale into a relationship. It also protects you: if a question arises about a strand you made, the card shows exactly what was specified and why.

A decision you can defend

A commission is chosen in a fixed order: bead hardness, weight, hole size, wear, and the knotted or continuous question. Each answer narrows the field, and the record card keeps the reasoning with the piece. That is what separates a professional choice from a lucky one.

Frequently asked questions

How do I choose a bead cord for a commission?

Work in order: bead hardness, weight, hole diameter, wear pattern, then knotted or continuous. Pearls and soft stones suit 100% Natural Silk; hard gemstones suit High Performance.

What cord for a heavy gemstone necklace?

GRIFFIN High Performance is specified for hard gemstones and heavy beads. It does not stretch, so the necklace does not elongate over time.

When should I use beading wire instead of cord?

Use beading wire when the strand is heavy, the holes are large, and the professional designers want to drape without knots. GRIFFIN Jewelry Wire is available in 19 and 49-strands.

How do I measure a bead hole?

Use a fine graded needle or a bead gauge on several beads from the strand, then test the cord through a bead before starting.

BT
0subscribers